home *** CD-ROM | disk | FTP | other *** search
- Printer definition file for WSSINDEX custom print utility
-
- All lines of this file are comments until a line beginning ----. After that,
- alternate lines are comments and parameters. See the CUSTPRNT documentation
- for a description of the format allowed here.
- This file was generated by looking at printer drivers from WordPerfect
- and PC Write; it may well have problems.
- Box forming characters may need to be bracketed by \e = ... \e ? to prevent
- stripping the high bit.
-
- Commands used in this file:
- \e 30 9 = (9-1)/48 inch line spacing (6 lines per inch)
- \e 31 13 = compressed print
- \e * \0 = draft mode
- \e E \1 \2 = (?????)
- \e [ = select on
- \e L \0 \4 = 12 lines per inch
- \e L \0 \6 = 8 lines per inch
- ------------------------------------------------------------
- Printer name
- Toshiba P321/P341e/P351/P351C (untested)
- Optional string printed on all labels
- Property of <your name here>
- Printer initialization command for 1,2,... column printing, 50 max
- \e 30 9, \e 31 13
- Printer initialization command for labels, 50 max (pitch, line spacing, etc.)
- \e * \0, \e E \1 \2, \e [, \e E \1 \2, \e L \0 \4
- Printer initialization command for disk covers, 50 max
- \e * \0, \e E \1 \2, \e [, \e E \1 \2, \e L \0 \6
- Printer deinitialization command, 10 max (form feed for laser printer, etc.)
- \e 30 9, \e 31 13
- Number of spaces in left margin for labels
- 5
- Number of columns for labels
- 1
- Width of labels (characters)
- 50
- Number of characters between labels (if multiple columns)
- 5
- Length of label in lines (including unusable lines)
- 12
- Number of usable lines for label
- 9
- Number of spaces in left margin for disk covers
- 0
- Width of paper for disk covers (characters)
- 82
- Length of page in lines for disk covers
- 40
- Printer command to position for the next disk cover
- 10 10 10 10
- Character to use for sides of disk cover box (32 = blank prints faster)
- 245
- Character to use for top and bottom lines
- 241
- Character to use for top left corner
- 240
- Character to use for top right corner
- 242
- Character to use for bottom left corner
- 246
- Character to use for bottom right corner
- 247
- End of printer configuration file
-